Fitting LED Strips into Profiles

Hi-Line Lighting has expanded its range to include slim profiles that are able to house all of our current LED strips. 

LED profiles are a neat and tidy solution to housing your strips and can help immeasurably in diffusing your light source, as well as providing essential cooling for strips that tend to run a bit warm.

Please be aware, however, that if you are intending to install LED strips with any of our connectors attached to them, this may affect your set-up. Always be sure that the connector you choose will fit comfortably within your selected profile. For example: a profile may have an inner width of 12.2mm, which can hold a 12mm strip with ease, but if that strip has a 17mm connector attached, it means you will have to secure a profile with an inner width upwards of 20mm. This also applies to the depth of the profile; some are slim-line while recessed models may have a little extra room for height. 

Please refer to connector dimensions on their respective page.

If your requirements need to be strict, say, no wider than 12mm, then we suggest instead that soldering be done by a professional at all times, providing a little extra peace of mind.